UT136E Datasheet, PDF (1/5 Pages) Unisonic Technologies – TRIACS

UTC UT136E
TRIACS
DESCRIPTION
Passivated, sensitive gate triacs in a plastic envelope, intended
for use in general purpose bidirectional switching and phase
control applications, where high sensitivity is required in all four
quadrants.
SYMBOL
1
MT2
TRIAC
TO-220
G
MT1
1:MT1 2:MT2 3:GATE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
UNIT
Repetitive peak off-state voltages
UT136E-5
UT136E-6
UT136E-8
VDRM
500*
V
600*
800
RMS on-state current
full sine wave; Tmb ≤107 °C
IT(RMS)
4
A
Non-repetitive peak on-state current
(Full sine wave; Tj = 25 °C prior to surge)
t = 20ms
t = 16.7 ms
I²t for fusing
t = 10 ms
ITSM
I²t
25
A
27
A²s
3.1
Repetitive rate of rise of on-state current after triggering
ITM = 6 A; IG = 0.2A;dIG /dt = 0.2A/μs
T2+ G+
50
T2+ G-
dIT /dt
50
A/μs
T2- G-
50
T2- G+
10
Peak gate voltage
VGM
5
V
Peak gate current
IGM
2
A
Peak gate power
PGM
5
W
Average gate power (over any 20 ms period)
Storage temperature
Operating junction temperature
PG(AV)
0.5
W
Tstg
-40 ~ 150
℃
Tj
125
℃
*Although not recommended, off-state voltages up to 800V may be applied without damage, but the traic may switch
to the on-state. The rate of rise of current should not exceed 3A/µs.
UTC UNISONIC TECHNOLOGIES CO., LTD. ¹
QW-R401-009,C