US201-A-B-C Datasheet, PDF (1/7 Pages) Unisonic Technologies – HIGH-SIDE POWER SWITCHES WITH FLAG

UNISONIC TECHNOLOGIES CO., LTD
US201/A/B/C
HIGH-SIDE POWER SWITCHES
WITH FLAG
„ DESCRIPTION
The UTC US201/A/B/C series are 80mΩ high-side power
switches. There’s internal single low voltage N-Channel MOSFET
which makes it an ideal for all USB applications. This MOSFET
should be driven by a charge pump circuitry inside. Its switch on
resistance is as low as 80mΩ which we know specially meets the
drop voltage for USB applications.
The flag pin can output an open-drain fault flag to next controller.
There’re lots internal special ways for protecting the chip’s
operation.
When in hot-plug events, there’s large current which can create
the upstream voltage droop to match the USB’s voltage droop
requirements and soft-start for isolating the power source.
As soon as the die temperature is higher than 130℃, the internal
shutdown circuit will work.
Only when there’s a normal input voltage in the V_IN pin, the
UVLO (under-voltage lockout, 1.3V/2.5V typ.) can make sure the
chip is till in the off state.
Because of the requirement of USB power the fault current
should be ensured less than 0.6A/1.1A (UTC US201/A, single port)
and 1.3A /1.5A (UTC US201B/C, dual ports).
„ FEATURES
* 80mΩ(Typ) N-Channel MOSFET
* Supply Current:
– Switch On : 25μA(Typ)
– Switch Off : 1μA (Typ)
* Load Current 500mA for US201 and 1.0A for US201A/B/C
* Input Voltage from 2V ~ 5.5V
* In Off-State: Output Voltage can be Higher than Input
„ ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
US201XXL-AF5-R
US201XXG-AF5-R
Package
SOT-25
CMOS IC
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 7
QW-R502-302.E