UIC811_12 Datasheet, PDF (1/8 Pages) Unisonic Technologies – MICROPROCESSOR RESET CIRCUITS

UNISONIC TECHNOLOGIES CO., LTD
UIC811
MICROPROCESSOR RESET
CIRCUITS
„ DESCRIPTION
The UTC UIC811 series are resetting circuits which can
monitor power supplies especially in microprocessor based
systems.
In normal operation, the UTC UIC811 series can assert a reset
under any of the following situation: the power supply drops below
a designated reset threshold level (which is available for 3V or 3.3V
or 5V system) or MR is forced low.
There is an internal active low RESET output which has
already been guaranteed to remain asserted for at 140ms least
while V_CC rises above the designed threshold level.
„ FEATURES
* Voltage monitor for 3V or 3.3V or 5V power supplies
* Valid RESET remains with V_CC as low as 1V
* Typical supply current: 5µA
* Fixed 140ms minimum reset pulse width
* With Manual reset input
„ ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
UIC811L-x-AD4-R
UIC811G-x-AD4-R
UIC811L-x-AE2-R
UIC811G-x-AE2-R
UIC811L-x-AE3-R
UIC811G-x-AE3-R
Note: x: Output Voltage, refer to Marking Information.
Package
SOT-143
SOT-23-3
SOT-23
CMOS IC
Packing
Tape Reel
Tape Reel
Tape Reel
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 8
QW-R502-317.H