UIC811 Datasheet, PDF (1/9 Pages) Unisonic Technologies – MICROPROCESSOR RESET CIRCUITS

UNISONIC TECHNOLOGIES CO., LTD
UIC811
LINEAR INTEGRATED CIRCUIT
MICROPROCESSOR RESET
CIRCUITS
„ DESCRIPTION
The UTC UIC811 series are resetting circuits which can
monitor power supplies especially in microprocessor based
systems.
In normal operation, the UTC UIC811 series can assert a reset
under any of the following situation: the power supply drops below
a designated reset threshold level (which is available for 3V or 3.3V
or 5V system) or MR is forced low.
There is an internal active low RESET output which has
already been guaranteed to remain asserted for at 140ms least
while V_CC rises above the designed threshold level.
„ FEATURES
* Voltage monitor for 3V or 3.3V or 5V power supplies
* Valid RESET remains with V_CC as low as 1V
* Typical supply current: 5µA
* Fixed140ms minimum reset pulse width
* With Manual reset input
* Halogen Free
„ ORDERING INFORMATION
Ordering Number
Package
UIC811G-x-AD4-R
SOT-143
Note: x: Output Voltage, refer to Marking Information.
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 9
QW-R502-317.D