UIC809_15 Datasheet, PDF (1/8 Pages) Unisonic Technologies – MICROPROCESSOR RESET CIRCUITS

UNISONIC TECHNOLOGIES CO., LTD
UIC809
MICROPROCESSOR RESET
CIRCUITS
CMOS IC
 DESCRIPTION
The UTC UIC809 series are resetting circuits which can monitor
power supplies especially in microprocessor based systems.
In normal operation, the UTC UIC809 series can assert a reset
under any of the following situation: the power supply drops below a
designated reset threshold level (which is available for 3V or 3.3V or
5V system) is forced low.
There is an internal active low RESET output which has already
been guaranteed to remain asserted for at 140ms least while V_CC
rises above the designed threshold level.
 FEATURES
* Voltage monitor for 3V or 3.3V or 5V power supplies
* Valid RESET remains with V_CC as low as 1V
* Typical supply current: 5µA
* Fixed 140ms minimum reset pulse width
* With Manual reset input
 ORDERING INFORMATION
Ordering Number
Package
Pin Assignment
1
2
3
UIC809G-x-AE2-3-R
SOT-23-3 RESET
GND
V_CC
Note: Pin Assignment : x: Output Voltage, refer to Marking Information.
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 8
QW-R119-024.A