RCT2E Datasheet, PDF (1/6 Pages) Unisonic Technologies – ENCODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS

UTC RCT2E
ENCODER FOR REMOTE
CONTROLLER WITH FIVE
FUNCTIONS
DESCRIPTION
The UTC RCT2E can be used with the decoder
UTC RCR2C to provide a complete control functions
to the remote-controlled toy. The UTC RCT2E is the
transmitter. It is provide five function keys to control
forward, Backward, Rightward, Leftward and Turbo
motions. Beside, a combination of these five motions
can be played.
UTC RCT2E is built with auto Power-OFF function.
When input key is pulled low, UTC RCT2E will wake
up, SC and SO will continuously send out code in RF
format (Non-Carrier) and IR format (Carrier). However,
when a complete code is sent out and the key is
released, UTC RCT2E will automatically go into
powered-off mode.
FEATURES
* Wide and Low operating voltage range: 1.8V ~ 5.0V
* 5-function remote controller controlling forward/
backward/ turbo/ right/ left.
* Provide two transmissive interface (RF and IR) for
different application.
* Auto Power-OFF function
* Few external components needed and Oscillator with
an external resistor.
* Low Standby current and low operating current.
* Long distance Remote Control to 100M in UTC
RCT2E and UTC RCR2C pairing.
* Typical oscillator frequency:
RF: 116 ~ 140KHz.
IR: 114KHz(Carrier Frequency: 57KHz).
IR: 76KHz(Carrier Frequency: 38KHz).
CMOS IC
DIP-14
UTC UNISONIC TECHNOLOGIES CO., LTD. 1
QW-R502-027,B