RCR2C Datasheet, PDF (1/7 Pages) Unisonic Technologies – DECODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS

UTC RCR2C
DECODER FOR REMOTE
CONTROLLER WITH FIVE
FUNCTIONS
DESCRIPTION
The UTC RCR2C can be used with the encoder
UTC RCT2E to provide a complete control functions to
the remote-controlled toy. The UTC RCR2C is the
receiver. It is provide five function keys to control
forward, Backward, Rightward, Leftward and Turbo
motions. Beside, a combination of these five motions
can be played. And UTC RCR2C provides the
selections of Output Signal Format.
UTC RCR2C provides two high effective amplifiers
and enhancive Signal Input (SI) recognition capacity
for incresing remote control distance.
UTC RCR2C has an internal, selectable DC-DC
converter that makes the application stable, reliable
under lower supply voltage. The input voltage ranges
from 0.8v ~ 3.0V, where VOUT can be set to 3.0V.
Start-up is guaranteed from 1.0V inputs.
FEATURES
* Wide and Low operating voltage range:
1.8V ~ 5.0V(No DC-DC)
1.0V ~ 5.0V(Use DC-DC)
* 5-function output pins for control forward/ backward/
turbo/ right/ left.
* Provide two transmissive interface (RF and IR) for
different application.
* Selectable Output Signal Format through MOD pin
* Internal , Selectable DC-DC converter which need
few external components
* Provide two high effective amplifiers and enhancive
signal enput (SI) recognition capacity for very weak
signal for increasing remote control distance.
* Few external components needed and Oscillator with
an external resistor.
* Low operating current.
* Long distance Remote Control to 100M in UTC
RCT2E and UTC RCR2C pairing.
* Typical oscillator frequency:
RF: 116 ~ 140KHz.
IR: 114KHz(Carrier Frequency: 57KHz).
IR: 76KHz(Carrier Frequency: 38KHz).
CMOS IC
DIP-16
UTC UNISONIC TECHNOLOGIES CO., LTD. 1
QW-R502-026,A