PA3332 Datasheet, PDF (1/10 Pages) Unisonic Technologies – 2.6W STEREO AUDIO AMPLIFIER

UNISONIC TECHNOLOGIES CO., LTD
PA3332
Preliminary
2.6W STEREO AUDIO
AMPLIFIER
„ DESCRIPTION
The UTC PA3332 is a stereo audio power amplifier.
When the device is idle, it enters SHDN mode for some low
current consumption applications. The current dissipation is thus
reduced below 5μA. Mute function is included to mute the output.
Operating on a 5V power supply, the UTC PA3332 is capable of
driving a 4.0 Ω BTL load at a continuous average RMS output of
2.0W per channel with a less than 1% THD.％
There are two input paths, therefore, two different gain loops
can be set in the same PCB. We could choose one of the two gain
paths through the logic level of IN/IN pin. This increases the
flexibility of the hardware design. In order to prevent the speakers
from burned-out, the UTC PA3332 also has a function of maximum
output power clamping is designed.
„ FEATURES
* Including de-pop circuit
* Output power at 1% THD+N, VDD=5V
2.0W/CH (TYP.) into a 4Ω Load
1.3W/CH (TYP.) into a 8Ω Load
* Output power at 10% THD+N, VDD=5V
2.6W/CH (typical) into a 4Ω Load
1.6W/CH (typical) into a 8Ω Load
* BTL mode (Bridge-Tied Load)
* Maximum output power clamping circuitry contained
* Mute and shutdown control available
* Stereo input MUX
* Halogen Free
„ ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
PA3332L-N24-T
PA3332G-N24-T
PA3332L-N24-R
PA3332G-N24-R
Package
HTSSOP-24
HTSSOP-24
CMOS IC
Packing
Tube
Tape Reel
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 10
QW-R502-488.A