P1888G-S08-R Datasheet, PDF (1/4 Pages) Unisonic Technologies – Thermal Shutdown function

UNISONIC TECHNOLOGIES CO., LTD
P1888
Preliminary
PWM CONTROL 3A
STEP-DOWN CONVERTER
CMOS IC
 DESCRIPTION
UTC P1888 consists of 3A step-down switching regulator
control which includes a reference voltage source, oscillation
circuit, error amplifier, internal PMOS and etc with PWM.
UTC P1888 can provide low-ripple power, high efficiency, and
excellent transient characteristics and an enable function, an over
current protect function and a short circuit protect function are built
inside, so the operation frequency will be reduced from 300KHz to
30KHz when OCP or SCP happens. And the PWM control circuit
can vary the duty ratio linearly from 100 down to 0%. This
converter also includes an error amplifier circuit as well as a
soft-start circuit that prevents overshoot at startup. Also, to
minimum external component count an internal compensation
block is built in.
UTC P1888 can work as step-down switching regulators with
the addition of an internal P-channel Power MOS, a coil,
capacitors, and a diode connected externally. It provides such
outstanding features: low current consumption. It is also suitable for
the operation via an AC adapter because this converter can
accommodate an input voltage up to 23V.
 FEATURES
* Soft-start, Current Limit, Enable function
* Thermal Shutdown function
* Built-in internal SW P-channel MOS
* Input voltage: 4V~23V.
* Output voltage: 1.23V~V_CC.
* Duty ratio: 0% to 100% PWM control
* Oscillation frequency: 300KHz typ.
 ORDERING INFORMATION
Ordering Number
P1888G-S08-R
Package
SOP-8
SOP-8
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R103-111.a