LR9101 Datasheet, PDF (1/4 Pages) Unisonic Technologies – LOW NOISE 300mA LDO REGULATOR

UNISONIC TECHNOLOGIES CO., LTD
LR9101
Preliminary
LOW NOISE 300mA LDO
REGULATOR
 DESCRIPTION
The UTC LR9101 is a typical LDO (linear regulator) with the
features of high output voltage accuracy, low supply current, low
ON-resistance, and high ripple rejection.
During operation of the UTC LR9101, the dropout voltage is
very low and the response of line transient and load transient are
very well.
Internally, there’re many functions of UTC LR9101 which can
be seen in the block figure. There are a voltage reference unit, an
error amplifier, resistor-net for voltage setting, a current limit circuit,
and a chip enable circuit in each UTC LR9101.
The UTC LR9101 can be used as an ideal of the power supply
for hand-held communication equipment, such as: power source for
portable communication equipment, power source for electrical
appliances, for example, cameras, VCRs and camcorders and
power source for battery-powered equipment.
 FEATURES
* Supply Current:
50µA (Typ.)
* Standby Mode:
0.1µA (Typ.)
* Very Low Dropout Voltage:
0.17V (Typ.)
@I_OUT =150mA, V_OUT =2.5V
* Ripple Rejection:
70dB (Typ.)
@f=1kHz,V_OUT=2.5V
* Well Line Regulation:
0.02%/ V (Typ.)
* Output Voltage Accuracy:
±1.0% (Typ.)
* C_IN=C_OUT=1µF or more (Ceramic capacitors) are recommended to
be used with this IC
 ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
LR9101L-xx-AE5-R
LR9101G-xx-AE5-R
Note: xx: Output Voltage, refer to Marking Information.
Package
SOT-23-5
CMOS IC
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 4
QW-R502-A14.a