LMV3011G-AG6-R Datasheet, PDF (1/5 Pages) Unisonic Technologies – Voltage reference initial accuracy

UNISONIC TECHNOLOGIES CO., LTD
LMV3011
Preliminary
LINEAR INTEGRATED CIRCUIT
NANOPOWER, 1.8V,
COMPARATOR WITH
VOLTAGE REFERENCE
 DESCRIPTION
The UTC LMV3011 is a low-power, open-drain logic
compatible output comparator and can provide an independent
on-chip voltage reference. The UTC LMV3011 has 5µA (max)
quiescent current, and input common-mode range 200mV beyond
the supply rails. Single-supply operation can range from 1.8V to
5.5V. The integrated 1.242V series voltage reference with low
100ppm/°C (max) drift is stable with up to 10nF capacitive load,
and the output current can be up to 0.5mA (Typ).
The UTC LMV3011 is also available in the tiny SOT-26
package for space-conservative designs. The device is specified
for the temperature range of -40°C~+125°C.
 FEATURES
* Low quiescent current: 5µA (max)
* Stable on-chip voltage reference: 1.242V
* Voltage reference initial accuracy: ±1%
* Reference output current: 0.5mA (Typ)
* Input common-mode range: 200mV beyond rails
* The lower supply voltage: 1.8V ~ 5.5V
* fast response time: 6µs propagation delay
with 100mV overdrive (R_PULL-UP=10kΩ)
 ORDERING INFORMATION
Ordering Number
LMV3011G-AG6-R
Note: Pin Assignment: G: Gate D: Drain
S: Source
Package
SOT-26
65 ⁴
1 ²³
SOT-26
Packing
Tape Reel
 MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 5
QW-R104-008.a