LM318_15 Datasheet, PDF (1/5 Pages) Unisonic Technologies – HIGH SPEED OPERATIONAL AMPLIFIER

UNISONIC TECHNOLOGIES CO., LTD
LM318
LINEAR INTEGRATED CIRCUIT
HIGH SPEED OPERATIONAL
AMPLIFIER
 DESCRIPTION
The UTC LM318 is a precision, high speed, high gain operational
amplifier that has been specifically designed for use in high slew rate
and wide bandwidth applications. Unlike many wideband amplifiers,
the UTC LM318 is unity-gain stable since it has internal circuitry for
frequency compensation. However, external components may be
added for compensation to achieve optimum performance.
When used in inverting applications, feed-forward compensation
can be used to achieve slew rate in excess of 150V/µs and almost
double the bandwidth. For greater stability, using overcompensation
with the amplifier is possible if maximum bandwidth is not needed. In
general, by adding a single capacitor can reduce the settling time for
0.1% error band to under 1µs.
The typical applications of UTC LM318 include A/D converters,
fast integrator, oscillators, active filters, sample and hold circuits, or
general purpose amplifiers.
 FEATURES
* Unit gain stable (internal frequency compensation)
* 4mV typical input offset voltage
* 30nA typical input offset current
* Input bias current of 250nA (maximum)
* 15MHz bandwidth (small signal)
* 50V/μs slew rate (guarantee)
* Operates voltages of ±5V to ±20V
* Overload protection for Input and output
* Same pin assignment as general-purpose op amps
 ORDERING INFORMATION
Lead Free
LM318L-D08-T
-
Order Number
Halogen Free
LM318G-D08-T
LM318G-S08-R
Package
DIP-8
SOP-8
Packing
Tube
Tape Reel
 MARKING
DIP-8
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
SOP-8
1 of 5
QW-R105-016.D