MCE-3E5B-001 Datasheet, PDF (1/2 Pages) Unity Opto Technology – 1310 nm LASER DIODE

1310 nm LASER DIODE
MCE-3E5B-001
Features
♦1310 nm typical emission wavelength
♦High temperature operation no TEC required
♦5 mW CW operation at wide temp. range
(-40~+80^OC)
♦Low threshold current ,low operating current
♦PIN photodiode for monitoring laser output
♦High reliability, long operation life and
advanced packaging technology
--- Multiple Quantum Well active layer
--- Hermetically sealed active component
--- 5.6 mm packaging with a ball lens cap
Applications
♦Optical communication system
--- Optical data links
--- Optical LANs
--- Subscriber loops
Handling and Safety Precautions
Anti-static protection, such as ionized air blowers
or grounded wrist straps with a 1 mega series
resistor, should be used at all times when
handling laser diodes. In addition, soldering irons
should be well grounded.
Overheating caused by soldering of the leads of a
laser diode must be prevented. Recommend
soldering iron temperature and maximum
exposure times are below 260^OC and 10 seconds.
Description
The MCE-3E5B-001 is a low cost and high
performance 1310 nm EEL ( Edge Emitting Laser )
and built-in InGaAs/InP PIN photodiode for optical
output monitoring. This product is designed for
short and medium distance optical fiber
communication.
The MCE-3E5B-001 is compatible with industry
standard wave or hand solder processes and eye
safety .
Unity Opto Technology Co., Ltd.
10 F, No. 88-8, Sec. 1, Kuang-Fu Rd.,
Sanchung City, 241 Taipei, Taiwan
For prototype and Production call
TEL: 886 - 2 -2999 - 3988
FAX: 886 - 2 -2999 - 3910
REV. A2
02/25/2003