LCE Datasheet, PDF (4/5 Pages) EIC discrete Semiconductors – LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR

Axial Lead Transient Voltage Suppressors (TVS)
SAC Series 6.5 To 90 V 1500W Low Capacitance
Ratings and Characteristic Curves (T_A=25°C unless otherwise noted) (Continued)
Physical Specifications
Environmental Specifications
Weight
Case
Polarity
Terminal
0.032 ounce, 0.9 gram
JEDEC DO-201 Molded Plastic over
glass passivated junction
Color band denotes cathode except
Bipolar
Matte Tin-plated leads, Solderable per
JESD22-B102D
Temperature Cycle
Pressure Cooker
High Temp. Storage
HTRB
Thermal Shock
JESD22-A104
JESD22-A102
JESD22-A103
JESD22-A108
JESD22-A106
Soldering Parameters
TP
TL
TS(max)
Ramp-up
TS(min)
25
Preheat
Time to peak temperature
(t 25℃ to peak)
Critical Zone
TL to TP
Ramp-down
Time
Reflow Condition
Lead–free assembly
Pre Heat
-Temperature Min (Ts(min))
-Temperature Max (Ts(max))
150°C
200°C
- Time (min to max) (ts)
60 -180 Seconds
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reflow
- Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)
60 -150 Seconds
Peak Temperature (TP)
260 +0/-5°C
Time within 5°C
Temperature (tp)
of
actual
peak
20 -40 Seconds
Ramp-down Rate
6°C/second max
Time 25°C to peak Temperature (TP)
Do not exceed
8 minutes Max
280°C
Dimensions
DO-201
Cathode Band
Dimensions
A
B
C
D
Inches
Min
Max
1.000
-
0.285
0.375
0.038
0.042
0.189
0.209
Millimeters
Min
Max
25.40
-
7.24
9.53
0.97
1.07
4.79
5.30
UN Semiconductor Co., Ltd.
Revision October 18, 2013
4/5
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.