JK130 Datasheet, PDF (4/4 Pages) UN Semiconducctor INC – Radial Lead Resettable Polymer PTCs

Radial Lead Resettable Polymer PTCs
JK130 Series
Dimensions
Part
Number
JK130-010
JK130-015
JK130-017
JK130-020
JK130-025
JK130-030
JK130-040
JK130-050
JK130-065
JK130-075
JK130-090
JK130-110
JK130-135
JK130-160
JK130-185
JK130-200
Figure1
Figure
A
mm
(Max.)
Figure1
7.4
Figure1
7.4
Figure1
7.4
Figure1
7.6
Figure1
7.6
Figure1
8.0
Figure1
9.4
Figure1
10.2
Figure1
10.2
Figure1
12.8
Figure1
14.5
Figure2
16.3
Figure2
17.0
Figure2
18.0
Figure2
22.0
Figure2
22.0
B
mm
(Max.)
12.7
13.0
13.5
13.5
13.5
14.0
15.0
15.2
15.2
18.0
19.6
21.3
22.0
23.0
23.0
27.0
Figure2
C
mm
(Typ.)
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
5.1
10.2
D
mm
(Max.)
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
3.1
Lead (dia)
Inches mm
Packaging
(Bulk Pack)
0.020
0.5
0.020
0.5
0.020
0.5
0.020
0.5
0.020
0.5
0.020
0.5
0.020
0.5
0.024
0.6
0.024
0.6
0.024
0.6
0.031
0.8
0.031
0.8
0.031
0.8
0.031
0.8
0.031
0.8
0.031
0.8
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
Warning
u This product should not be used in an application where the maximum interrupt voltage or maximum interrupt current in a fault
condition, Operation beyond the maximum rating or improper use may result in device damage and possible electrical arcing and
flame.
u A PPTC device is not a fuse, It is a nonlinear thermistor that limits current, Because under a fault condition all PPTC devices go
into a high resistance state but not open circuit hazardous voltage may be present at PPTC.
u The devices are intended for protection against occasional over-current or over-temperature fault conditions and should not be
used when repeated fault conditions or prolonged trip events.
u In most application, power must be removed and the fault condition cleared in order to reset a PPTC device.
u PPTC devices are not recommended to be installed in applications where the device is constrained such that its PPTC properties
are inhibited, for example in rigid potting materials or Add devices surface coating, Bundled devices ontology, which lack
adequate clearance to accommodate device expansion.
u Contamination on of the PPTC material with certain silicone-based oils or some aggressive solvents can adversely impact the
performance of the devices. For example, Organic solvents to cleaning.
UN Semiconductor Co., Ltd.
Revision October 18, 2013
4/4
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.