ULC1204P Datasheet, PDF (2/3 Pages) UN Semiconducctor INC – ESD Array Series

ESD Array Series
ULC1204P
Electrical Characteristics (@ 25℃ Unless Otherwise Specified )
Charateristics
Rated voltage (max.)
Leakage current (max) (@12VDC
Trigger voltage (Vt)
Clamping voltage (Vc)
Capacitance (Cp), @ 1 MHz
Response time
ESD voltage capability, IEC 61000-4-2 Contact discharge mode
ESD voltage capability, IEC 61000-4-2 Air discharge mode
ESD withstand pulses
Characteristic Curves
ULC1204P
12V
0.01µA
300V typ.
30V typ.
0.1p F typ.
< 1 ns
8KV
15KV
100 typ.
Item
Specifications
Test Condition
Bias Humidity
Thermal Shock
Full Load Voltage
Solder Leach Resistance
IL ≦ 10µA
90% RH, 40℃, Rated Voltage, 1000hrs
-40℃ to 85℃, 30min. cycle, 5 cycles
Rated Voltage, 85℃, 1000 hrs
260±5℃, 10±1 sec.
IL – Leakage current at rated voltage, the maximum leakage current was measured afer reliability test.
UN Semiconductor Co., Ltd.
Revision December 18, 2013
2/3
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.