5KPS Datasheet, PDF (1/4 Pages) UN Semiconducctor INC – Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors
The 5KPS series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high power
DC bus clamping applications. These devices offer
uni/bi-directional port protection from 15 volts to 43 volts. They
provide a clamping voltage lower than the avalanche voltage.
Therefore, any voltage rise due to increased current conduction
is contained to a minimum, providing the best possible protection
level. They can also be connected in series and/or parallel to
create very high capacity protection solutions.
 JEDEC R-6/P-600 Molded Plastic.
 Glass passivated chip junction in R-6/P600 package.
 6600 W peak pulse power capability with a 10/1000 us
waveform, repetitive rate (duty cycle):0.01 %
 Low leakage
 Excellent clamping capability
 Very fast response time: typically less than 1.0ps from 0V to
VBR min.
 RoHS compliant
 Meet with ISO 7637-2,ISO 16750,etc
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application
Parameter
Peak power dissipation with a 10/1000us waveform
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak pulse current with a 10/1000us waveform
Operating junction and storage temperature range
Peak forward surge current, 8.3ms single half sine-wave
Symbol
PPPM
PD
I PP
T J , T STG
IFSM
Value
6600
8.0
See Next Table
–55 to +150
500
Units
W
W
A
°C
A
Revision February 2, 2015
1/4
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.