English
Language : 

UM4717_16 Datasheet, PDF (7/16 Pages) Union Semiconductor, Inc. – 4.5(OHM) 300MHz Bandwidth Dual SPDT Analog Switch
UM4717/UM4717Q
Electrical Characteristics (Single +5V Supply) (Continued)
(V+=+4.2V to +5.5V, TA=TMIN to TMAX, unless otherwise noted. Typical values are at V+=+5.0V,
TA=+25°C) (Notes 2, 3)
Symbol
Parameter
AC Electrical Characteristics
tON
Turn-On Time
tOFF
tBBM
tSKEW
Turn-Off Time
Break Before Make
Time
(Note 4)
Skew (Note 4)
QINJ
Charge Injection
VISO
Off Isolation
VCT
Crosstalk (Note 7)
BW
-3dB Bandwidth
THD
Total Harmonic
Distortion
Capacitance
CNO_(OFF)
CNC_(OFF)
C(ON)
NO_, NC_ Off
Capacitance
Switch On Capacitance
Test Conditions
VNO_, VNC_=3.0V;
RL=300Ω, CL=35pF, Figure 1;
VNO_, VNC_=3.0V;
RL=300Ω, CL=35pF, Figure 1;
VNO_, VNC_=3.0V;
RL=300Ω, CL=35pF, Figure 2
RS=39Ω, CL=50pF, Figure 3
CL=1.0nF, Figure 4
VGEN=1.5V, RGEN=0Ω
f=10MHz; VNO_, VNC_=1VP-P;
RL=50Ω, CL=5pF, Figure 5
f=1MHz; VNO_, VNC_=1VP-P;
RL=50Ω, CL=5pF, Figure 5
f=10MHz; VNO_, VNC_=1VP-P;
RL=50Ω, CL=5pF, Figure 5
f=1MHz; VNO_, VNC_=1VP-P;
RL=50Ω, CL=5pF, Figure 5
Signal=0dBm, RL=50Ω,
CL=5pF, Figure 5
RL=600Ω,
VCOM_=2VP-P
f=1MHz, Figure 6
f=1MHz, Figure 6
Limits
Temp
(–40°C to 85 °C)
Unit
Min Typ Max
Room
Full
Room
Full
Room
Full
1
Full
Room
Room
Room
Room
Room
30
80
100
ns
20
40
50
ns
8
ns
0.15 2 ns
9
pC
-50
dB
-70
-70
dB
-90
300
MHz
0.03
%
Room
9
pF
Room
15
pF
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
The parts are 100% tested at +25°C only, and guaranteed by design over the specified
temperature range.
The algebraic convention used in this data sheet is where the most negative value is a
minimum and the most positive value is a maximum.
Guaranteed by design.
ΔRON=RON(MAX)-RON(MIN).
Flatness is defined as the difference between the maximum and minimum value of
on-resistance as measured over the specified analog signal ranges.
Between any two switches.
________________________________________________________________________
http://www.union-ic.com Rev.14 Apr.2016
7/16