English
Language : 

UM4258Q_16 Datasheet, PDF (6/14 Pages) Union Semiconductor, Inc. – 4.5(OHM) 300MHz Bandwidth Dual SPDT Analog Switch
UM4258Q
AC Electrical Characteristics (Single +5V Supply)
(V+=+4.2V to +5.5V, VIH=+2.0V, VIL=+0.8V, TA=TMIN to TMAX, unless otherwise noted. Typical
values are at V+=+5.0V, TA=+25°C) (Note 2, 3)
Symbol
Parameter
Test Conditions
Limits
Temp (–40°C to 85°C) Unit
Min Typ Max
AC Electrical Characteristics
tON
Turn-On Time
VNO_, VNC_=3.0V;
Room
RL=300Ω, CL=35pF, Figure 1; Full
30
80
100
ns
tOFF
Turn-Off Time
VNO_, VNC_=3.0V;
Room
RL=300Ω, CL=35pF, Figure 1; Full
20
40
50
ns
tBBM
Break Before Make
VNO_, VNC_=3.0V;
Room
Time (Note 7)
RL=300Ω, CL=35pF, Figure 2 Full 1
8
ns
tSKEW
Skew (Note 7)
RS=39Ω, CL=50pF, Figure 3 Full
0.15 2 ns
QINJ
Charge Injection
CL=1.0nF, Figure 4
VGEN=1.5V, RGEN=0Ω
Room
9
pC
f=10MHz;
VNO_, VNC_=1VP-P;
-55
VISO
Off Isolation
RL=50Ω, CL=5pF, Figure 5
f=1MHz;
Room
dB
VNO_, VNC_=1VP-P;
-80
RL=50Ω, CL=5pF, Figure 5
f=10MHz;
VNO_, VNC_=1VP-P;
-80
VCT
Crosstalk (Note 8)
RL=50Ω, CL=5pF, Figure 5
f=1MHz;
Room
dB
VNO_, VNC_=1VP-P;
RL=50Ω, CL=5pF, Figure 5
-110
BW
-3dB Bandwidth
Signal=0dBm, RL=50Ω,
CL=5pF, Figure 5
Room
300
MHz
THD
Total Harmonic
Distortion
RL=600Ω,
VCOM_=2VP-P
Room
0.03
%
Capacitance
CNO_(OFF)
CNC_(OFF)
NO_, NC_ Off
Capacitance
f=1MHz, Figure 6
Room
9
pF
C(ON)
Switch On
Capacitance
f=1MHz, Figure 6
Room
15
pF
Note 2: The parts are 100% tested at +25°C only, and guaranteed by design over the specified
temperature range.
Note 3: The algebraic convention used in this data sheet is where the most negative value is a
minimum and the most positive value is a maximum.
Note 4: Guaranteed by design.
Note 5: ΔRON=RON(MAX)-RON(MIN).
Note 6: Flatness is defined as the difference between the maximum and minimum value of
on-resistance as measured over the specified analog signal ranges.
Note 7: Guaranteed by design.
Note 8: Between any two switches.
________________________________________________________________________
http://www.union-ic.com Rev.05 Apr.2016
6/14