UM3304 Datasheet, PDF (4/15 Pages) ShenZhen XinDeYi Electronics Co., Ltd. – N-Ch and P-Ch 30V Fast Switching MOSFETs

UM3304/UM3304Q/UM3304QT
Absolute Maximum Ratings (Note 1)
Over operating free-air temperature range (unless otherwise noted)
Symbol
V_CCA
V_CCB
V_I
V_O
Parameter
Supply Voltage Range
Supply Voltage Range
Input Voltage Range
A ports
B ports
Voltage Range applied to any output A ports
in the high-impedance or power-off
state
B ports
Value
Unit
-0.5 to +4.5
V
-0.5 to +6.5
V
-0.5 to +4.5
-0.5 to +6.5
V
-0.5 to +4.5
V
-0.5 to +6.5
V_O
Voltage Range applied to any output ^{A ports}
in the high or low state (Note 2)
B ports
-0.5 to ( V_CCA+0.5)
V
-0.5 to ( V_CCB+0.5)
I_IK
Input Clamp Current
V_I＜0
-50
mA
I_OK
Output Clamp Current
V_O＜0
-50
mA
I_O
Continuous Output Current
±50
mA
Continuous Current through V_CCA, V_CCB, or GND
±100
mA
T_OP
Operating Temperature Range
-40 to +85
°C
T_STG
Storage Temperature Range
-65 to +150
°C
Note1. Stresses beyond those listed under "absolute maximum ratings" may cause permanent
damage to the device. These are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended
periods may affect device reliability.
Note2. The value of V_CCA and V_CCB are provided in the recommended operating conditions table.
Recommended Operating Conditions (Note 1, 2)
Symbol
Parameter
V_CCA
V_CCB
Min
Max
Unit
V_CCA
V_CCB
V_IH
V_IL
V_O
Supply Voltage
High Level Input Voltage
Low Level Input Voltage
Voltage range applied to
any output in the
high-impedance or
power-off state
Data Inputs
OE
Data Inputs
OE
A-Port
B-Port
1.2
3.6
V
1.65
5.5
V
1.2V to 3.6V
1.65V to 5.5V V_CCI×0.65^(Note3) V_CCI
V
1.2V to 3.6V 1.65V to 5.5V V_CCA×0.65
5.5
V
1.2V to 3.6V 1.65V to 5.5V 0
V_CCI×0.35^(Note3)
V
1.2V to 3.6V 1.65V to 5.5V
0
V_CCA×0.35
V
0
1.2V to 3.6V 1.65V to 5.5V
0
3.6
V
5.5
Δt/Δv
Input Transition
Rise or Fall Time
A-Port Inputs
B-Port Inputs
1.2V to 3.6V
1.2V to 3.6V
1.65V to 5.5V
1.65V to 3.6V
4.5V to 5.5V
40
40
ns/V
30
Note1. The A and B sides of an unused data I/O pair must be held in the same state, i.e., both at V_CCI or both
at GND.
Note2. V_CCA must be less than or equal to V_CCB and must not exceed 3.6 V.
Note3. V_CCI is the supply voltage associated with the input port.
________________________________________________________________________
http://www.union-ic.com Rev.11 Sep.2013
4/15