UM4684 Datasheet, PDF (3/12 Pages) Union Semiconductor, Inc. – 0.5Ω Low-Voltage Dual SPDT Analog Switch

UM4684
Function Table
IN_
NO_
NC_
0
OFF
ON
1
ON
OFF
Absolute Maximum Ratings
Reference to GND
V+ . . . . . . . . . . . . . . . . .. . . . . . . . -0.3 to +6 V
IN, COM, NC, NO . . . . . . . .-0.3to (V₊+ 0.3 V)
Continuous Current (NO, NC, COM) .±300 mA
Peak Current . . . . . . . . . . . .. . . .. . . . . ±500 mA
(Pulsed at 1 ms, 10% duty cycle)
Storage Temperature (D Suffix) . . -65 to 150°C
b
Package Solder Reflow Conditions
IR/Convection. . . . . . . . . . . . . . . . . .. 250°C
ESD per Method 3015.7 . . . . . . . . . . . . . .> 2 kV
c
Power Dissipation (Packages)
CSP10 . . . . . . . . . .. . . . . . . . . . . . . . . .457 mW
Notes:
a. Signals on NC, NO, or COM or IN
exceeding V+ will be clamped by internal
diodes. Limit forward diode current to
maximum current ratings.
b. Refer to IPC/JEDEC (J-STD-020B).
c. All bumps welded or soldered to PC Board.
d. Derate 5.7 mW/°C above 70°C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage
to the device. These are stress ratings only and functional operation of the device at these or any
other conditions beyond those indicated in the operational sections of the specifications are not
implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
_______________________________________________________________________
http://www.union-ic.com Rev.08Jun.2012
3/12