UM3087E Datasheet, PDF (3/13 Pages) Union Semiconductor, Inc. – ±15kV ESD-Protected, Fail-Safe, Hot-Swappable

UM3087E
DC Electrical Characteristics (Continued)
(V_CC = +5V ±5%, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at V_CC= +5V and
T_A = +25°C.) (Note 1)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
RECEIVER
Receiver Differential
Threshold Voltage
V_TH
-7V≤V_CM≤12V
-200
-50 mV
Receiver Input Hysteresis ΔV_TH
V_CM=0V
25
mV
Receiver Input Resistance
R_IN
-7V≤V_CM≤12V
96
KΩ
Input Current (L1 and L2)
DE = GND, ^{VIN = 12V}
I_IN2 V_CC = GND or
5V
V_IN = -7V
1.0
mA
-0.8
Receiver Output High Voltage V_OH I_O = -1.5mA, V_ID = 200mV V_CC -1.5
V
Receiver Output Low Voltage V_OL
Three-State Output Current at
Receiver
I_OZR
I_O = 2.5mA, V_ID = 200mV
0V ≤ V_O ≤ V_CC
0.4 V
±1 µA
Receiver Output Short Circuit
Current
I_OSR
0V≤V_RO ≤V_CC
±8
±60 mA
ESD Protection
Human Body Model
±15
ESD Protection for A, B
IEC61000-4-2 Air Discharge
±15
kV
IEC61000-4-2 Contact
±8
Note 1: All currents into the device are positive; all currents out of the device are negative. All
voltages are referred to device ground unless otherwise noted.
Note 2: ΔV_OD and ΔV_OC are the changes in V_OD and V_OC, respectively, when the DI input changes
state.
Note 3: Maximum current level applies to peak current just prior to fold back current limiting;
minimum current level applies during current limiting.
________________________________________________________________________
http://www.union-ic.com Rev.02 Jan.2014
3/13