UM3243 Datasheet, PDF (1/22 Pages) Union Semiconductor, Inc. – Low Supply Current, 3V to 5.5V, 250kbps, 3-Driver/5-Receiver, Enhanced ESD Protection Smart RS-232 Transceivers

UM3243
Low Supply Current, 3V to 5.5V, 250kbps, 3-Driver/5-Receiver,
Enhanced ESD Protection Smart RS-232 Transceivers
UM3243EEAS/UM3243EEUS/UM3243EESS/UM3243EEQA
General Description
The UM3243 series are 3-driver/5-receiver 3V-5.5V powered RS-232 transceivers featuring Auto
Power-Off and low supply current, when no valid RS-232 level signal is sensed on any receiver inputs,
the charge pump circuit and drivers will be powered off. Disconnection of the RS-232 cable or
poweroff of the transmitters of the attaching peripherals will lead to Power-Off mode. When a valid
level is applied to any RS-232 receiver inputs, the chip will turn on again. The Auto Power-Off mode
helps to save power without changing the existing system.
The UM3243 transceivers have a regulated discontinuous mode dual charge pump power supply and
low-dropout transmitters, which combine to deliver true RS-232 performance from a single +3V to
+5.5V supply. Data rate of 250kbps is guaranteed.
The UM3243 needs only four 0.1μF capacitors in 3.3V operation, and can operate from input voltages
ranging from +2.7V to +5.5V. They are ideal for 3.3V-only systems, mixed 3.3V and 5.0V systems,
or 5.0V-only systems that require true RS-232 performance or EIA/TIA-562 levels of ±3.7V with
supply voltages as low as 2.7V.
The UM3243 includes one complementary always-active receiver. This receiver can monitor an
e_{__}x_{__}t_{_}e_{__}r_{_}n_{__}a_{__}l_{___}d_{__}evice (such as a modem) in Power-Off. The UM3243 also includes an always-active
INVALID output which indicates valid RS-232 signal levels on any receiver inputs. It is usually used
in UART wakeup. The UM3243 also features enhanced ESD protection with ±15kV for human body
mode and ±8kV for IEC61000-4-2 contact discharge mode.
Applications
 Industrial Controllers and Instruments
 Notebooks, Palmtop PCs and Laptops
 Networking Routers and Switches
 Peripherals
 Printers, PDAs and POS
Features
 Meets True EIA/TIA-232-F Standards from a +3.0V to +5.5V Power Supply
 Meets EIA/TIA-562 Levels of ±3.7V with Supply Voltages as Low as 2.7V
 Auto Power-Off Feature to Disable Driver Outputs when No Valid RS-232 Signal is Sensed
 250kbps Minimum Transmission Rate
 0.1μA (Typ) Low Power-Off Current
 Accepts 5V Logic Input with 3.3V Supply
 Latch-Up Performance Exceeds 200mA
 Enhanced ESD Specifications for RS-232 Pins:
±15kV Human Body Mode
±8kV IEC61000-4-2 Contact Discharge Mode
 Available in SSOP28, TSSOP28, SOP28 and QFN32 Packages
http://www.union-ic.com Rev.01 Mar.2015
1/22