MR-12 Datasheet, PDF (1/1 Pages) UNIOHM CORPORATION – Jumper Wire & Zerohm Resistors

Uniohm Corporation
Jumper Wire & Zerohm Resistors
Jumper Wire & Zerohm Resistors
Film Type Zerohm
1/8W 1/4W
MR-12 MR-25 (Metal Film)
CR-12 CR-25 (Carbon Film)
Wire Type Zerohm
Jumper Wires
0.5
APPLICATION
Series MR CR JP
FEATURES
Similar to 1/4 Watt resistor (1/8w size also
available, typical resistance 0.004 ).
Ideal for automatic insertion or Cut and
Form.
Available in Tape/Reel, Tape/Box (Ammo
Pack) and Bulk.
Film type Zerohm also available in 1/4w
& 1/8w size
SPECIFICATIONS
Jumper wires or crossovers, as they are
sometimes called, are basically interconnection
devices between points on a P.C. Board.
Generally they are used for the following
reasons
Inability to other circuit paths which must
be crossed over.
An After-the-Fact design change that
requires new Point connections.
Circuit tuning by changing point
connections.
Jumper wires offers a quick simple solution to
these problems. They are expecially suited for
automatic machine insertion on lead tape or
available in all pack-aging styles including
precut and formed leads for manual insertion.
DIMENSIONS
Maximum Resistance…………………0.005
……………..……
……….………
……………..………………
………………………………..
…………………….…
…………………………….
…..…
………
…..………
Bulk-1,000 pcs (500 per bag)
1