GBJ601 Datasheet, PDF (1/2 Pages) UNIOHM CORPORATION – SINGLE PHASE 6.0 AMP BRIDGE RECTIFIERS

GBJ601 THRU GBJ607
SINGLE PHASE 6.0 AMP BRIDGE RECTIFIERS
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
6.0 Amperes
FEATURES
* Ideal for printed circuit board
* Low forward voltage
* Low leakage current
* Mounting position: Any
1.193(30.3)
1.169(29.7)
GBJ
.134(3.4)
.122(3.1)
.203(5.2)
.189(4.8)
.150(3.8)
.134(3.4)
.094(2.4)
.078(2.0)
.043(1.1)
.035(0.9)
~~
.114(2.9)
.098(2.5)
.031(0.8)
.023(0.6)
.402(10.2) .303(7.7)
.386(9.8) .287(7.3)
.303(7.7) _SPACING
.287(7.3)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward (with heatsink Note 2)
.375"(9.5mm) Lead Length at Tc=110 C (With heatsink)
Peak Forward Surge Current, 8.3 ms single half sine-wave
GBJ601 GBJ602 GBJ603 GBJ604 GBJ605 GBJ606 GBJ607 UNITS
50 100 200 400 600 800 1000 V
35
70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
6.0
A
2.8
A
superimposed on rated load (JEDEC method)
170
A
Maximum Forward Voltage Drop per Bridge Element at 3.0A D.C.
1.0
V
Maximum DC Reverse Current
Ta=25 C
5.0
mA
at Rated DC Blocking Voltage
Typical Thermal Resistance RqJC (Note 1)
Typical Thermal Resistance RqJL (Note 2)
Operating Temperature Range, TJ
Storage Temperature Range, TSTG
NOTES:
Ta=100 C
500
mA
3.4
C/W
5.0
C/W
-55 +150
C
-55 +150
C
1. Thermal Resistance from Junction to Case with device mounted on 75mm x 75mm x 1.6mm Cu Plate Heatsink.
2. Thermal Resistance from Junction to Lead without Heatsink.