H2U262GKBA0100 Datasheet, PDF (9/10 Pages) Unictron Technologies Corporation – 5x2.2x1.6 Bluetooth/Wi-Fi Chip Antenna (Standard)

9. Layout Guide:
a. Solder Land Pattern:
Land pattern for soldering (black marking areas) is as shown below. Depending on
Customer’s requirement, matching circuit as shown below is also recommended .
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit：mm
Prepared By : Gilespi
Checked By : Jason
Designed By :Wilson
Approved By :Jaixing
TITLE： 5x2.2x1.6 Bluetooth/Wi-Fi Chip
Antenna (Standard)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
H2U262GKBA0100
REV.
C
PAGE 9
OF 10