H2U1631S1A0100 Datasheet, PDF (7/10 Pages) Unictron Technologies Corporation – 10 x 3.2 x 3.9 GPS Chip Antenna (AA064)

8. Layout Guide:
a. Solder Land Pattern:
Land pattern for soldering (black marking areas) is as shown below. Depending on
Customer’s requirement, matching circuit as shown below is also recommended.
Top View
9. Frequency tuning:
a. Chip antenna tuning scenario：
Feed
Back View
Fine tuning element
Matching circuit
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit：mm
Prepared By : Meiping
Checked By : Chinling
Designed By : Chinling Approved By : Herbert
TITLE： 10x3.2x3.9 GPS Chip Antenna
(AA064)
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
DOCUMENT
NO.
H2U1631S1A0100
REV.
A
PAGE 7
OF 10