H2U34WGTQW0100 Datasheet, PDF (2/11 Pages) Unictron Technologies Corporation – 3.2x1.6x0.5 WiFi/Bluetooth Ceramic Chip Antenna (AA055)

2. Features
*Stable and reliable in performances
*Low temperature coefficient of frequency
*Low profile, compact size
*RoHS compliance
*SMT processes compatible
3. Applications
*Bluetooth earphone systems
*Hand-held devices when Bluetooth/WiFi functions are needed, e.g., Smart phone.
*IEEE802.11 b/g/n
*ZigBee
*Wireless PCMCIA cards or USB dongle
4. Description
Unictron’s chip antenna series are specially designed for Bluetooth/WiFi applications.
Based on Unictron’s proprietary design and processes, this chip antenna has
excellent stability and sensitivity to consistently provide high signal reception
efficiency.
5. Electrical Specifications (80x40(mm) ground plane)
5-1.
Characteristics
Specifications
Unit
Outline Dimensions
3.2x1.6x0.5
mm
Ground Plane
80x40
mm
Center Frequency*
2442
MHz
Bandwidth (under -10dB return loss)
VSWR
100 min.
2 max.
MHz
Impedance
Polarization
50
Ω
Linear Polarization
Gain**
Peak
Efficiency
Temperature Coefficient
of Frequency
2.5 (typical)
84 (typical)
0±20 max
(@ -40℃~85℃)
dBi
%
ppm/℃
*Center frequency will be offset to working frequency according to the conditions of user’s ground plane and radome.
**The data was measured by A Test Lab Techno Corp.(CTIA Authorized Test Lab).
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit：mm
Prepared By : Meiping
Checked By :Chinling
Designed By : Andrew
Approved By :Herbert
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
TITLE： 3.2x1.6x0.5 WiFi/Bluetooth Ceramic
Chip Antenna (AA055)
DOCUMENT
NO.
H2U34WGTQW0100
REV.
F
PAGE 2
OF 11