H2U64U1H2B0200 Datasheet, PDF (15/16 Pages) Unictron Technologies Corporation – ISM 868 MHz Ceramic Chip Antenna

Datasheet: AA701-H2U64U1H2B0200
Introduction Electrical Characteristics Radiation Pattern Layout Tuning Packing Notes
6.2 Operating and storage conditions:
Operating:
Maximum Input Power: 2W
Operating Temperature: -40°C to +85°C
6.3 Installation guide:
Storage:
Storage Temperature -5°C to +40°C
Relative Humidity: 20% to 70%
Shelf Life: 1 year
Request Unictron’s application notes “General guidelines for the installation of
Unictron’s chip antennas” for further information at [e-mail].
6.4 Reminders for users of Unictron’s AA701
ceramic chip antennas
6.4.1. This chip antenna is made of ceramic materials which are relatively
more rigid and brittle compared to printed circuit board materials. Bending of
circuit board at the locations where chip antenna is mounted may cause the
cracking of solder joints or antenna itself.
6.4.2. Punching/cutting of the break-off tab of PCB panel may cause severe
bending of the circuit board which may result in cracking of solder joints or
chip antenna itself. Therefore break-off tab shall be located away from the
installation site of chip antenna.
6.4.3. Be cautious when ultrasonic welding process needs to be used near
the locations where chip antennas are installed. Strong ultrasonic vibration
may cause the cracking of chip antenna solder joints.
Page 15 / 16
Unique Electronics You Need