H2U16V1A1A0100 Datasheet, PDF (10/10 Pages) Unictron Technologies Corporation – 10 x 3.2 x 2.0 GPS Chip Antenna (AA065)

11. Packing:
(1) Quantity/Reel: 2000pcs/Reel
(2) Plastic tape:
1. Cumulative tolerance of 10 sprocket hole pitch: ±0.20mm
2. Carrier camber not to exceed 1mm in 250mm
3. Ao and Bo measured on a plane above the inside bottom
of the pocket.
4. Ko measured from a plane on the inside bottom of the
pocket to the top surface of the carrier.
5. All dimensions meet EIA-481-B requirements.
6. Material: □ Clear Non Anti-Static Polystyrene.
■ Black Conductive Polystyrene.
12. Storage Conditions:
(1) Temperature: -25℃ to 85℃
(2) Relative Humidity: 20% to 70%
2.1 Tape Dimensions(unit: mm)
Feature Specifications Tolerances
W
24.00
±0.30
P
8.00
±0.10
E
1.75
±0.10
F
11.50
±0.10
P2
2.00
±0.10
D
1.50
+0.10
-0.00
D1
1.50
±0.10
Po
4.00
±0.10
10Po
40.00
±0.20
2.2 Pocket Dimensions(unit: mm)
Feature Specifications Tolerances
Ao
3.60
±0.10
Bo
10.50
±0.10
Ko
2.40
±0.10
t
0.35
±0.05
Tolerances (Unless otherwise specified)
X: ± 1
X.X : ± 0.1
X.XX : ± 0.01
Angle : ±
Hole Dia. : ±
Scale :
Unit：mm
Prepared By : Meiping
Checked By : Chinling
Designed By : Chinling Approved By : Herbert
Unictron Technologies Corporation
Website: www.unictron.com
THIS SPECIFICATION IS THE PROPERTY OF UNICTRON
TECHNOLOGIES CORPORATION AND SHALL NOT BE REPRODUCED
OR USED IN ALL CIRCUMSTANCES WITHOUT WRITTEN PERMISSION
TITLE： 10 x 3.2 x 2.0 GPS Chip Antenna
(AA065)
DOCUMENT
NO.
H2U16V1A1A0100
REV.
B
PAGE 10
OF 10