CHR2244-QDG_15 Datasheet, PDF (9/14 Pages) United Monolithic Semiconductors – 5.8 GHz One Antenna Reflective Transponder for Tag

5.8 GHz One Antenna Reflective Tag
CHR2244-QDG
Evaluation board
Important notice / design recommendations
Device slug should be connected to RF ground plane through multiples vias (>=9).
An external matching may be required to optimize RF performances on 50Ω impedance, versus
substrate height.
A RF ground plane height of 0.008” (0.203mm) under the component (evaluation board) provides the
highest RF performances thanks to low RF ground inductance and low pin to pin coupling.
Ref. :DSCHR2244-QDG9030 - 30 Jan 09
9/14
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: [phone] - Fax : [phone]