MUX-PO9824 Datasheet, PDF (2/6 Pages) United Monolithic Semiconductors – 7.5-30GHz Frequency Multiplier

MUX-PO9824
7.5-30GHz Frequency Multiplier
Electrical Characteristics
These values are representative on wafer measurements that are made without bonding
wires at the RF ports.
Tamb=+25°C, Vd=3.5V Vg1=Vg2=-0.9V Vg3 adjusted fo r Id=75mA under RF Pin=+12dBm
Symbol
Parameter
Min Typ Max Unit
Fin Input frequency range
6.25
8.25 GHz
Fout Output frequency range
25
33
GHz
Pin Input power
12
dBm
Pout 4xFin Output power for +12 dBm input power
8
11
14
dBm
Pout 1xFin Fin level at the output ( 6.25 < Fin < 8.25GHz ),
for +12dBm input power
0
2
dBm
Pout 2xFin 2Fin level at the output ( 12.5 < 2Fin < 16.5GHz
), for +12dBm input power
-10
3
dBm
Pout 3xFin 3Fin level at the output ( 18.75 < 3Fin <
24.75GHz ), for +12dBm input power
0
12
dBm
Pout 5xFin 5Fin level at the output ( 31.25 < 5Fin <
41.25GHz ), for +12dBm input power
0
dBm
VSWRin Input VSWR
2.5:1
VSWRout Output VSWR
2.5:1
Id
Bias current
75
mA
A wire bond of typically 0.1 to 0.15 nH will improve the input and output matching.
Absolute Maximum Ratings
Tamb=+25°C
Symbol
Parameter
Vd
Supply voltage
Id
Supply current
Pin Input power
Ta
Operating temperature range
Tstg Storage temperature range
Values
4.0
150
20
-40 to +85
-55 to +125
Unit
V
mA
dBm
°C
°C
(1) Operation of device above anyone of these parameters may cause permanent damage.
Ref. : DSMUX-P098247117 - 27 Apr 07
2/6
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: [phone] - Fax : [phone]