CHP6013-SRF Datasheet, PDF (2/5 Pages) United Monolithic Semiconductors – L-band Phase Shifter

CHP6013-SRF
L-band Phase Shifter
Electrical Characteristics
• Tamb = +25°C
• Test conditions: Pin ≤ 0dBm, Low level control voltage = -6V, High level control voltage = 0V
• Specifications for the main bit states: 0, 1, 2, 4, 8, 16, 32 and 63
Symbol
Parameter
Fop
Operating frequency range
AV
Amplitude variation
PPE
Peak Phase Error
IL
Insertion loss
ILm
Insertion loss match at state 0 unit to unit (1)
Ipm
Insertion phase match at state 0 unit to unit (1)
VSWRin Input VSWR
VSWRout Ouput VSWR
(1) Average value defined by production lot.
Min Max Unit
1.2 1.4 GHz
± 1 dB
±5
°
8.5 dB
± 0.25 dB
±7
°
2:1
2.3:1
ESD Protections : Electrostatic discharge sensitive device observe handling precautions !
Peak Phase Error (PPE) definition:
PPE(i)=measured_phase(S21)@state(i) – measured_phase(S21)@state(0) – theoretical_phase
value@state(i)
(i) = 0, 1, 2, 4, 8, 16, 32, 63 = main bit states.
Amplitude variation (AV) definition:
AV(i) = measured_dB(S21)@state(i) – measured_dB(S21)@state(0)
(i) = 0, 1, 2, 4, 8, 16, 32, 63 = main bit states.
Absolute Maximum Ratings
Tamb = +25°C
Operation of this device above anyone of these paramaters may cause permanent damage.
Symbol
Parameter
Vgi
Phase shifter control voltage
Pin
Maximum peak input power overdrive (1)
Top
Operating temperature range
Tstg Storage temperature range
(1) Duration < 1s.
Values
-7.5
+30
-40 to +85
-55 to +125
Unit
V
dBm
°C
°C
Ref. : DSCHP60134254 - 10 Sep 04
2/5
Specifications subject to change without notice
Route Départementale 128 , B.P.46 - 91401 ORSAY Cedex - FRANCE
Tel.: [phone] - Fax : [phone]