CHT4694-QAG_15 Datasheet, PDF (12/14 Pages) United Monolithic Semiconductors – 25- 40GHz ATTENUATOR

CHT4694-QAG
25-40GHz Attenuator
Packaged part biasing options
To obtain good performances in linearity, biasing voltage should be applied as following:
Control of 1^st stage attenuation with V1 from –5V to 0V, with V2 fixed at -5V
Control of 2^nd stage with V2 from –5V to 0V, with V1 fixed at 0V
RF IN
…
…
…
…
RF OUT
V1
V2
Voltage
0V
V1
-5V
V2
Min.
Max.
Attenuation
This part could be also driven in Single Voltage Control, applying the same voltage from -5V
to 0V on V1 and V2.
Ref. : DSCHT4694QAG0211 - 30 Jul 2010
12/14
Specifications subject to change without notice
Route Départementale 128, BP46 - 91401 ORSAY Cedex - FRANCE
Tel.: [phone] - Fax: [phone]