OP07 Datasheet, PDF (10/12 Pages) Analog Devices – Ultralow Offset Voltage Dual Operational Amplifier

TYPICAL APPLICATIONS
Product specification
OP07
APPLICATIONS INFORMATION
OP07 series units may be substituted directly
into 725, 108A/ 308A* and OP05 sockets with or
without removal of external compensation or
nulling components. Additionally, the OP07 may
be used in unnulled 741 type sockets. However,
if conven-tional 741 nulling circuitry is in use, it
should be modified or removed to enable proper
OP07 operation. OP07 offset voltage may be
nulled to zero through use of a potentiometer
(see offset nulling circuit diagram). PRECISION
ABSOLUTE-VALUE CIRCUIT The OP07
Provides stable operation with load capacitance
Of up to 500 pF and ± 10 V swings; larger
Capacitances should be decoupled with a 50 Q
Decoupling resistor. Stray thermoelectric
Voltages generated by dissimilar metals at the
Contacts to the input terminals can degrade drift
Performance. Therefore, best operation will be
Obtained when both input con-tacts are
Maintained at the same temperature, preferably
Close to the package temperature.
http://www.twtysemi.com
[e-mail]
4008-318-123
10 of 12