MBRA340T3 Datasheet, PDF (1/2 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

Product specification
MBRA340T3
Employing the Schottky Barrier principle in a large area
metal−to−silicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
• Small Compact Surface Mountable Package with J−Bent Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Guardring for Stress Protection
• Pb−Free Package is Available
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 12 mm tape, 5000 units per 13 inch reel
• Polarity: Cathode Lead Indicated by Polarity Band
• ESD Ratings: Machine Model = C
ESD Ratings: Human Body Model = 3B
• Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
V_RRM
40
V
Working Peak Reverse Voltage
V_RWM
DC Blocking Voltage
V_R
Average Rectified Forward Current
I_O
3.0
A
(At Rated V_R, T_L = 100°C)
Non−Repetitive Peak Surge Current
I_FSM
100
A
(Surge Applied at Rated Load
Conditions Halfwave, Single Phase,
60 Hz)
Storage/Operating Case Temperature T_stg, T_C −55 to +150 °C
Operating Junction Temperature
T_J
−55 to +125 °C
Voltage Rate of Change
(Rated V_R, T_J = 25°C)
dv/dt
10,000
V/ms
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
SCHOTTKY BARRIER
RECTIFIER
3.0 AMPERES
40 VOLTS
1
Cathode
2
Anode
1
2
SMA
CASE 403D
PLASTIC
MARKING DIAGRAM
A34
ALYW
A34 = Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
ORDERING INFORMATION
Device
Package
Shipping^†
MBRA340T3
SMA
5000/Tape & Reel
MBRA340T3G
SMA
5000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
http://www.twtysemi.com
[e-mail]
4008-318-123
1 of 2