OPB960L51 Datasheet, PDF (2/6 Pages) OPTEK Technologies – Choice of logic and output driver circuits

PACKAGE OUTLINE for OPB960 and OPB970 Series
TABLE 1
Lead No. Function
1
Anode
2
Cathode
3
Vcc
4
Output
5
Ground
APERTURE WIDTH GUIDE
CODE
LED
SENSOR
55 .050” [1.27mm] .050” [1.27mm]
51 .050” [1.27mm] .010” [0.25mm]
11 .010” [0.25mm] .010” [0.25mm]
Lengths are .050” [1.27mm]
Notes:
(1) RMA flux recommended. Duration can be extended to 10 seconds max.
(2) Feature controlled at body.
(3) Highly activated water soluble fluxes may attack plastic. Recommend trial to verify application.
(4) Maximum lead soldering temperature [1.6mm from case for 5 seconds with soldering iron] 260° C.
(5) Cathode lead may be shorter.
(6) Part number marking may be on any side.