|
GUS-QS8BLF012001-G Datasheet, PDF (1/4 Pages) TT Electronics. – Surface Mount QSOP Resistor Networks | |||
|
Surface Mount QSOP
Resistor Networks
QSOP Series
⢠Reliable, no internal cavity
⢠High resistor density - .025" lead spacing
⢠Standard JEDEC 16, 20, and 24 pin packages
⢠Ultra-stable TaNSil® resistors on silicon substrate
⢠RoHS compliant and Sn/Pb terminations available
IRCâs TaNSil® QSOP resistor networks are the perfect solution for high volume applications that demand a
small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component
count, lower resistor cost, and high reliability.
The tantalum nitride ï¬lm system on silicon provides precision tolerance, exceptional TCR tracking, low cost
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRCâs
self-passivating TaNSil® resistor ï¬lm.
The QSOP series is ideally suited for the latest surface mount assembly techniques and each lead can be
100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses
created by soldering and temperature excursions.
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC QSOP resistor networks.
Electrical Data
Resistance Range
Absolute Tolerance
Ratio Tolerance to R1
10 to 250Kâ¦
To ±0.1%
To ±0.05%
Absolute TCR
To ±25ppm/°C
Tracking TCR
To ±5ppm/°C
Element Power Rating @ 70°C
Isolated Schematic
Bussed Schematic
100mW
50mW
Package Power Rating @ 70°C
16-Pin
20-Pin
24-Pin
750mW
1.0W
1.0W
Rated Operating__V_o_l_ta_ge
(not to exceed â P x R)
100 Volts
Operating Temperature
-55°C to +125°C
Noise
<-30dB
Environmental Data
Test Per
MIL-PRF-83401
Typical
Delta R
Thermal Shock
±0.02%
Power Conditioning
±0.03%
High Temperature Exposure ±0.03%
Short-time Overload
±0.02%
Low Temperature Storage
±0.03%
Life
±0.05%
Max Delta
R
±0.1%
±0.1%
±0.05%
±0.05%
±0.05%
±2.0%
General Note
IRC reserves the right to make changes in product speciï¬cation without notice or liability.
All information is subject to IRCâs own data and is considered accurate at time of going to print.
© IRC Advanced Film Division ⢠Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 ⢠Facsimile: 361 992 3377 ⢠Website: www.irctt.com
A subsidiary of
TT electronics plc
QSOP Series Issue January 2009 Sheet 1 of 4
|
▷ |