CC1 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film 0402 Size Resistor on Alumina

Resistors
Carbon Composition Resistors
Make Possible
CC Series
Hot moulded carbon composition
High pulse voltage and energy capability
Non-inductive
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
Electrical Data
Power rating at 25°C
Resistance range
Maximum pulse voltage
TCR (20 to 70°C)
Resistance Tolerance
Standard Values
Ambient temperature range
Thermal Impedance
watts
ohms
volts
ppm/ °C
%
°C
°C/watt
CC1
1
100R – 50K
51
See pulse graphs
< ±1000
10 or 20 *
E12
-55 to 125
CC2
2
100R – 10K
28
* Tolerance applies to date of manufacture. As in all carbon composition parts value drift in storage is possible. This is typically ±3% in one year and ±5% in 2 years.
Physical Data
Dimensions (mm) & Weight (g)
Type
L
D
d
CC1
15 +1.5/-0.5 6 +0.2/-0.1
0.8 ±0.05
CC2
18 +1.5/-0.5 8 +0.2/-0.1
1.0 ±0.05
f
28 ±1
28 ±1
Wt. nom.
1.1
2.4
Construction
CC series resistors are produced using a hot moulded
carbon composition material which is varied to produce
the required resistance value. The leads are moulded
into the resistor. Finally these are coated and band
marked.
Solvent Resistance
The body protection and marking are resistant to all normal
industrial cleaning solvents suitable for printed circuits.
Marking
CC series resistors are colour coded. Resistors with 20% tolerance
have three bands indicating value, and resistors with 10%
tolerance have four bands indicating value and tolerance in
accordance with IEC62.
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
www.ttelectronicsresistors.com
07.14