628 Datasheet, PDF (1/5 Pages) Mallory performance club – RPM ACTIVATED SWITCH

Resistors
Model 628
Model 628 Series
• .220” Small Outline
• Dual-In-Line
• Thick Film
• Surface Mount
• Resistor Networks
• RoHS Compliant
All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2)
Electrical
Standard Resistance Range, Ohms
Standard Resistance Tolerance, at 25°C
Operating Temperature Range
Temperature Coefficient of Resistance
Temperature Coefficient of Resistance, Tracking
Maximum Operating Voltage
Insulation Resistance
Environmental
Thermal Shock plus Power Conditioning
Short Time Overload
Moisture Resistance
Mechanical Shock
Vibration
Low Temperature Operation
High Temperature Exposure
Load Life, 2000 Hours (≤330Ω = ±0.5 Ohm)
Resistance to Solder Heat (Total Immersion in solder at 280°C for 10 sec.)
Dielectric Withstanding Voltage
Temperature Exposure, Maximum
Marking Permanency
Lead Solderability
Flammability
Storage Temperature Range
10 to 1Meg (Plus “0” Ohm Jumper)
±2%(<33Ω = ±1 Ohm)
(Optional: F Tol. = ±1%)
-55°C to +125°C
±100ppm/°C (<100Ω = ±250ppm/°C)
±50ppm/°C
50Vdc or √PR
≥10,000 Megohms
ΔR 0.70%
ΔR 0.25%
ΔR 0.50%
ΔR 0.25%
ΔR 0.25%
ΔR 0.25%
ΔR 0.50%
ΔR 0.50%
ΔR 0.25%
200V for 1 minute
215°C for 3 minutes
MIL-STD-202, Method 215
MIL-STD-202, Method 208
UL-94V-0 Rated
–55°C to +150°C
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
© TT Electronics plc
BI Technologies IRC Welwyn
www.ttelectronicsresistors.com
05.16