TS2938_07 Datasheet, PDF (3/7 Pages) Taiwan Semiconductor Company, Ltd – 500mA Ultra Low Dropout Voltage Regulator with Inhibit Function

TS2938
500mA Ultra Low Dropout Voltage Regulator
with Inhibit Function
Electrical Characteristics (Continue)
Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed
Specifications and test conditions see the Electrical Characteristics.
Note 2: Maximum positive supply voltage of 60V must be limited duration (<100mS) and duty cycle (<1%).
Note 3: The maximum allowable power dissipation is a function of the maximum junction temperature, Tj, the junction
to ambient thermal resistance, θja, and the ambient temperature, Ta. Exceeding the maximum allowable
power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. The
effective value of θja can be reduced by using a heatsink.
Note 4: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its
nominal value measured at 1V differential.
Note 5: Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of the
ground pin current and output load current.
Note 6: Output current will decrease with increasing temperature, but it will be not dropped below 500mA at the
maximum specified temperature.
Application Circuit
Fixed Output Voltage Type
Adjustable Output Voltage Type
3/7
Version: A07