TS9010 Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – 150mA CMOS Low Dropout Voltage Regulator with Enable

TS9010
150mA CMOS Low Dropout Voltage Regulator with Enable
Pin assignment
1. Ground
2. Input
3. Enable
4. N/C
5. Output
Low Power Consumption
Low Drop Out Voltage 0.4V
Enable Shutdown
General Description
The TS9010 series is combine high accuracy with very low power consumption, providing high output current even when
the application requires very low dropout voltage. The Chip Enable (CE) includes a CMOS or TTL compatible input allows
the output to be turned off to prolong battery life. The TS9010 series is included a precision voltage reference, error
correction circuit, a current limited output driver and over temperature shutdown.
This series are offered in 5-pin SOT-25 package.
Features
Ordering Information
— Dropout voltage typically 0.4V @Io=150mA (Vo=5V)
— Output current up to 150mA (Vout=3V)
— Low power consumption
— Output voltage +/-2%
— Internal current limit
— Thermal shutdown protection
Applications
— Palmtops
— Video recorders
— Battery powered equipment
— PC peripherals
— High-efficiency linear power supplies
— Digital signal camera
Part No.
Operating Temp. Package
(Ambient)
TS9010xCX5
-40 ~ +85 ^oC
SOT-25
Note: Where x denotes voltage option, available are
A= 1.5V
D= 1.8V,
K= 2.5V,
S= 3.3V,
5= 5.0V.
Contact factory for additional voltage options.
Typical Application Circuit
Block Diagram
CE (pin 3) may be connected directly to Vin (pin 2)
TS9010 series
1-4
2004/09 rev. C