TS78L06CX Datasheet, PDF (1/12 Pages) Taiwan Semiconductor Company, Ltd – 3-Terminal 100mA Positive Voltage Regulator

TS78L00 Series
3-Terminal 100mA Positive Voltage Regulator
TO-92
Pin Definition:
1. Output
2. Ground
3. Input
SOT-23
Pin Definition:
1. Output
2. Input
3. Ground
SOP-8
Pin Definition:
1. Output 8. Input
2. Ground 7. Ground
3. Ground 6. Ground
4. N/C
5. N/C
SOT-89
Pin Definition:
TS78L00ACY
1. Output
2. Ground
3. Input
TS78L00CY
1. Input
2. Ground
3. Output
General Description
The TS78L00 Series of positive voltage Regulators are inexpensive, easy-to-use devices suitable for a multitude
of applications that require a regulated supply of up to 100mA. Like their higher power TS7800 and TS78M00
Series cousins, these regulators feature internal current limiting and thermal shutdown making them remarkably
rugged. No external components are required with the TS78L00 devices in many applications.
These devices offer a substantial performance advantage over the traditional zener diode-resistor combination,
as output impedance and quiescent current are substantially reduced.
Features
● Output Voltage Range 3.3 to 24V
● Output current up to 100mA
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 4% tolerance
Standard Application Circuit
Ordering Information
Part No.
Package
Packing
TS78LxxCT B0
TO-92
1Kpcs / Bulk
TS78LxxCT A3
TO-92
2Kpcs/ Ammo
TS78LxxACY RM SOT-89
1Kpcs / 7” Reel
TS78LxxCY RM
SOT-89
1Kpcs / 7” Reel
TS78LxxCS RL
SOP-8 2.5Kpcs / 13” Reel
TS78LxxCX RF
SOT-23
3Kpcs / 7” Reel
Note: Where xx denote voltage option
Available output voltage are: 03=3.3V, 05=5V, 06=6V,
08=8V, 09=9V, 12=12V, 15=15V, 18=18V, 24=24V
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point
on the Input ripple voltage.
XX = these two digits of the type number indicate
voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does
improve transient response.
Absolute Maximum Rating (T_A = 25^oC unless otherwise noted)
Parameter
Symbol
Limit
Unit
TS78L03
DC Input Voltage
TS78L05 ~ TS78L18
TS78L24
Power Dissipation
Operating Junction Temperature Range
Storage Temperature Range
V_IN
P_D
T_J
T_STG
30
35
V
40
Internal Limited
W
0 ~ +150
o_C
-65~+150
o_C
1/12
Version: D12