TS7800B_07 Datasheet, PDF (1/12 Pages) Taiwan Semiconductor Company, Ltd – 3-Terminal Fixed Positive Voltage Regulator

TO-220
ITO-220
TS7800B Series
3-Terminal Fixed Positive Voltage Regulator
TO-263
(D²PAK)
Pin Definition:
1. Input
2. Ground (tab)
3. Output
General Description
These voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of
applications including local, on-card regulation. These regulators employ internal current limiting, thermal shutdown,
and safe-area compensation. With adequate heatsink they can deliver output currents up to 1 ampere.
Although designed primarily as a fixed voltage regulator, these devices can be used with external components to
obtain adjustable voltages and currents.
Features
● Output Voltage Range 5 to 24V
● Output current up to 1.5A
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 4% tolerance
Ordering Information
Part No.
Package
Packing
TS78xxBCZ C0
TO-220
50pcs / Tube
TS78xxBCI C0
ITO-220
50pcs / Tube
TS78xxBCM RN TO-263 800pcs / 13” Reel
Note: Where xx denote voltage option
Standard Application Circuit
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point on
the Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
transient response.
Absolute Maximum Rating (Ta = 25 ^oC unless otherwise noted)
Parameter
Symbol
Input Voltage
V_IN*
Input Voltage
V_IN**
Power Dissipation
P_D
Operating Junction Temperature
T_J
Storage Temperature Range
T_STG
Note: * TS7805B to TS7818B
** TS7824B
*** Follow the derating curve
Limit
35
40
Internal Limited
0~+125
-65~+150
Unit
V
V
W
o_C
o_C
1/12
Version: A07