TS358_09 Datasheet, PDF (1/8 Pages) Taiwan Semiconductor Company, Ltd – Single Supply Dual Operational Amplifiers

TS358
Single Supply Dual Operational Amplifiers
SOP-8
DIP-8
Pin assignment:
1. Output A
8. Vcc
2. Input A (-) 7. Output B
3. Input A (+) 6. Input B (-)
4. Gnd
5. Input B (+)
General Description
Utilizing the circuit designs perfected for recently introduced Quad Operational Amplifiers, these dual operational
amplifiers have several distinct advantages over standard operational amplifier types in single supply applications.
They can operate at supply voltages as low as 3.0 Volts or as high as 32 Volts with quiescent currents about one fifth
of those associated with the LM741 (on a pet amplifier basis). The common mode input range includes the negative
supply, thereby eliminating the necessity for external biasing components in many applications. The TS358 is
equivalent to one half of TS324, and output voltage range also includes the negative supply voltage.
Features
● Short circuit protected outputs
● True differential input stage
● Single supply operation: 3V to 32V
● Low input bias currents
● Internally compensated
● Common mode range extends to negative supply
● Single and split supply operation
● Similar performance to the popular MC1558
Ordering Information
Block Diagram
Part No.
TS358CD C3
TS358CS RL
Package
DIP-8
SOP-8
Packing
50pcs / Tube
2.5Kpcs / 13” Reel
Absolute Maximum Rating
Parameter
Symbol
Limit
Unit
Supply Voltage
V_CC
+32 or ±16
V
Differential Input Voltage (Split Power Supplies)
Input Common Mode Voltage Range (note 1)
V_IDR
32
V
V_ICR
-0.3 to 32
V
Input Forward Current (note 2)
I_IF
50
mA
Output Short Circuit Duration
tsc
Continuous
Operating Junction Temperature Range
T_J
0 ~ +70
o_C
Storage Temperature Range
T_STG
-65 ~ +150
o_C
Note 1: For supply, voltages less than 32V for the TS358 the absolute maximum input voltage is equal to the supply
voltage.
Note 2: This input current will only exist when the voltage is negative at any of the input leads. Normal output states
will reestablish when the input voltage returns to a voltage greater than -0.3V.
1/8
Version: A09