TS324_09 Datasheet, PDF (1/8 Pages) Taiwan Semiconductor Company, Ltd – Low Power Quad Operational Amplifiers

TS324
Low Power Quad Operational Amplifiers
DIP-14
SOP-14
General Description
Pin Definition:
1. Output A 14. Output D
2. Input A (-) 13. Input D (-)
3. Input A (+) 12. Input D (+)
4. Vcc
11. Gnd
5. Input B (+) 10. Input C (+)
6. Input B (-) 9. Input C (-)
7. Output B 8. Output C
TS324 contains four independent high gain operational amplifiers with internal frequency compensation. The four op-
amps use a split power supply. The device has low power supply current drain, regardless or the power supply
voltage. The low power drain also makes the TS324 a good choice for battery operation. When your project calls for a
traditional op-amp function, now you can streamline your design with a simple single power supply. Use ordinary +5V
common to practically any digital system or personal computer application, without requiring an extra 15V power
supply just to have the interface electronics you need. TS324 is a versatile, rugged workhorse with a thousand-and-
one uses, from amplifying signals from a variety of transducers to dc gain blocks, or any op-amp function. The
attached pages offer some recipes that will have your project cooking in no time.
Features
● Single supply operation: 3V to 32V
● Low input bias currents
● Internally compensated
● Common mode range extends to negative supply
● Single and split supply operation
Block Diagram
Ordering Information
Part No.
TS324CD14 C4
TS324CS14 RL
Package
DIP-14
SOP-14
Packing
50pcs / Tube
2.5Kpcs / 13” Reel
Absolute Maximum Rating
Parameter
Symbol
Limit
Unit
Supply Voltage
V_CC
+32 or ±16
V
Differential Input Voltage (Split Power Supplies)
V_IDR
32
V
Input Common Mode Voltage Range (note 1)
Input Forward Current (note 2)
V_ICR
-0.3 to 32
V
I_IF
50
mA
Output Short Circuit Duration
T_SC
Continuous
Operating Temperature Range
T_OPR
0 ~ +70
o_C
Junction Temperature
T_J
+150
o_C
Storage Temperature Range
T_STG
-65 ~ +150
o_C
Note:
1, For supply voltages less than 32V for the TS324 the absolute maximum input voltage is equal to the supply voltage.
2, This input current will only exist when the voltage is negative at any of the input leads. Normal output states will
reestablish when the input voltage returns to a voltage greater than -0.3V.
1/8
Version: A09