TS29152 Datasheet, PDF (1/8 Pages) Taiwan Semiconductor Company, Ltd – 1.5A Ultra Low Dropout Voltage Regulator

TO-220-5L
TS29152
1.5A Ultra Low Dropout Voltage Regulator
TO-263-5L
(D²PAK)
Pin Definition:
1. Enable
2. Input
3. Ground
4. Output
5. Adjust
General Description
TS29152 is using process with a PNP pass element for high current, high accuracy and low dropout voltage
regulators. These regulator s feature 350mV(typ) dropout voltages and very low ground current, these devices also
find applications in lower current and low dropout critical systems, where their tiny dropout voltage and ground current
values are important attributes. TS29152 isfully protected against over current faults, reversed input polarity, reversed
lead insertion, over temperature operation, positive and negative transient voltage spikes, logic level enable control
and error flag which signals whenever the output falls out of regulation.
On the TS29152, the enable pin may be tied to V_IN if it is not required for enable control.
Features
● Dropout voltage typically 0.6V @ Io=1.5A
● Output Current up to 1.5A
● Low Ground Current
● Extremely Fast Transient Response
● +60V Transient Peak Voltage
● -20V Reverse Peak Voltage
● Zero Current Shutdown Mode
● Current Limit & Thermal Shutdown Protection
Application
● PowerPC^TM Power Supplies
● Battery Powered Equipment
● Consumer and Personal Electronics
● High Efficiency Linear Power Supplies
● High-efficiency Post Regulator for Switching Supply
● Low-Voltage microcontrollers and Digital Logic
Absolute Maximum Rating (Note 1)
Parameter
Supply Voltage
Operation Input Voltage
Power Dissipation (Note 4)
Operating Junction Temperature Range
Storage Temperature Range
Lead Soldering Temperature (260^oC)
Ordering Information
Part No.
TS29152CZ5 C0
TS29152CM5 RN
Package
TO-220-5L
TO-263-5L
Packing
50pcs / Tube
800pcs / 13” Reel
Symbol
V_IN
V_IN (operate)
P_D
T_J
T_STG
Limit
-20V ~ +60
26
Internally Limited
-40 ~ +125
-65 ~ +150
5
Unit
V
V
W
o_C
o_C
S
1/1
Version: A09