TS2418_08 Datasheet, PDF (1/5 Pages) Taiwan Semiconductor Company, Ltd – Telephone Tone Ringer with Bridge Diode

DIP-8
TS2418
Telephone Tone Ringer with Bridge Diode
Pin Definition:
1. Ring
5. TIP
2. Ground 7. RC
3. SRC
6. AVA
4. OFC
5. Output
General Description
The TS2418 is a monolithic integrated circuit telephone tone ringer with bridge diode, when coupled with an
appropriate transducer, it replaces the electromechanical bell. This device is designed for use with either a piezo
transducer or an inexpensive transformer coupled speaker to produce a pleasing tone composed of a high
frequency (fR) alternating with a low frequency (fL) resulting in a warble frequency. The supply voltage is obtained
from the AC ring signal and the circuit is designed so that noise on the line or variation of the ringing signal can not
affect correct operation of the device
Features
● On chip high voltage full wave diode bridge rectifier.
● Low current consumption, in order to allow the parallel
operation of the 4 devices.
● Low external component count.
● Tone and switching frequencies adjustable by external
components.
● High noise immunity due to built-in voltage current
hysteresis.
● Activation voltage adjustable.
● Internal zener diodes to protect against over voltages.
● Ringer impedance adjustable with external
components.
Ordering Information
Part No. Package
TS2418CD C3
DIP-8
Packing
50pcs / Tube
Block Diagram
1/5
Version: B07