|
TS2026L Datasheet, PDF (1/7 Pages) Taiwan Semiconductor Company, Ltd – Dual-Channel Power Distribution Switch | |||
|
TS2026L
Dual-Channel Power Distribution Switch
Pin assignment:
1. ENA 5. OUTB
2. FLGA 6. GND
3. FLGB 7. IN
4. ENB 8. OUTA
140m⦠max. on-resistance per channel
2.7V to 5.5V operating range
Under voltage lockout
General Description
The TS2026L is high-side MOSFET switches optimized for general-purpose power distribution requiring circuit
protection.
The TS2026L are internally current limited and have thermal shutdown that protects the device and load. When a
thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing that load or toggling
the enable input will reset the device output. Both device employ soft-start circuitry that minimized inrush current in
application where highly capacitive loads are employed. A fault status output flag is asserted during over current and
thermal shutdown conditions. Transient faults are internally filtered.
Features
ï² 140m⦠max. on-resistance per channel
ï² 2.7V to 5.5V operating range
ï² 500mA min. continuous current per channel
ï² Short-circuit protection with thermal shutdown
ï² Thermal isolated channels.
ï² Fault status flag with 3ms filter eliminates false
assertions.
ï² Under voltage lockout
ï² Reverse current flow blocking (no âbody diodeâ)
ï² Logic-compatible inputs
ï² Soft-start circuit
ï² Low quiescent current
Applications
ï² USB peripherals
ï² General purpose power switching
ï² ACPI power distribution
ï² Notebook PCs
ï² PDAsPC
ï² Card hot swap
Ordering Information
Part No.
TS2026LCS
Operating Temp.
(Ambient)
-40 ~ +85 oC
Package
SOP-8
Absolute Maximum Rating
Supply Voltage
Fault Flag Voltage
Fault Flag Current
Output Voltage
Output Current
Enable input
Storage Temperature
VIN
+6
V
VFLG
+6
V
IFLG
25
mA
VOUT
+6
oC
IOUT
Internal Limited
IEN
-0.3 ~ +3
V
TSTG
-65 ~ +150
oC
TS2026L
1-7
2005/11 rev. A
|
▷ |