English
Language : 

TBYV26C Datasheet, PDF (1/2 Pages) Taiwan Semiconductor Company, Ltd – 1.0 AMP. Glass Passivated Ultrafast Rectifiers
TBYV26C
Features
1.0 AMP. Glass Passivated Ultrafast Rectifiers
Voltage Range
600 Volts
Current
1.0 Ampere
DO-41
Low forward voltage drop high current
capability
Low leakage current
Ultrafast recovery time for high efficiency
High surge current capability
Mechanical Data
Cases: Molded plastic DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per
MIL-STD-202, Method 208 guaranteed
Polarity: Color band denotes cathode end
High temperature soldering guaranteed:
260oC/10 seconds/.375”,(9.5mm) lead
lengths at 5 lbs., (2.3kg) tension
Weight: 0.34gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
TBYV26C
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
600
V
Maximum RMS Voltage
VRMS
420
V
Maximum DC Blocking Voltage
VDC
600
V
Maximum Average Forward Rectified Current
.375 (9.5mm) Lead Length @TA = 55℃
I(AV)
(See Fig. 1)
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated Load
IFSM
(JEDEC method )
30
A
Maximum Instantaneous Forward Voltage
@1.0A
Tj=25℃
VF
Tj=175℃
2.5
V
1.3
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=165℃
IR
5.0
uA
150
uA
Maximum Reverse Recovery Time ( Note 1 )
Trr
30
nS
Typical Junction Capacitance ( Note 2 )
Cj
45
pF
Maximum Reverse recovery Current Slope
dIr/dt @ IF=1A, VR=30V, dIf/dt = 1A / uS
dv/dt
7
A/uS
Typical Thermal Resistance (Note 3)
RθJA
60
℃/W
Operating Temperature Range
TJ
-65 to +175
℃
Storage Temperature Range
TSTG
-65 to +175
℃
Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) Lead Length, Mount on 0.2” x
0.2” (5mm x 5mm) Cu pads.
- 364 -